Rice Lake SCT-1100, Техническое руководство

Страница: 71 / 88

Communications 67
2. Compile the parameters table.
The string length is 49 chars (from 0 to 48 included), however, the field

is set to 48 because to allow
for the character terminator
6.7 Primary, Secondary and Repeater Mode Configurations
These configurations are possible only if in the instrument is in the secondary mode.
6.7.1 Repeaters

The RepeaterDC  configuration is designed to control one or more remote displays connected via an
RS-232 or RS-485 and to coordinate communications over the single serial line.
Packets are sent from the “Master” to the remote displays at 100ms intervals; one ID per loop and no acknowledge
message will be received.
When the number of scales is defined in the “Master”, the rEPE.dC command will return scale values for each as
well as the sum for all connected scales. To limit the scale values returned, or remove readings from a particular
scale, use the  parameter to adjust.
REPE.6
Simple repetition of the DFW’s screen in the SCT. Can be used both in 232 and in 485. The repeater keys are disabled.
Parameter LCD Text Value

Remote scale terminator 010

Remote scale weight position 10

Remote scale weight length 10

Remote scale tare position 23

Remote scale tare length 10

Remote scale tare type position 21

Remote scale sting length 48
Table 6-10. Parameters Table
SCT-1100 repeater
  : 
 
 X
 
/

 
Table 6-11. Analog Cells
SCT-1100 repeater
  : 
 

X
 
 
Table 6-12. Digital Cells
Note