Rice Lake SCT-1100, Техническое руководство

Страница: 22 / 88

18 SCT-1100 Weight Transmitter
3. Press or to scroll forward or back through the following data.
• First range capacity

• First range minimum weight 
• First range division

• Second range division 
• Second range minimum weight

• Second range division 
• Gravitational Acceleration Value

• Number of Configured Channels 
4. Press to return to the weigh mode.
Pressing when information of the currently active channel is displayed allows for the metric data of the other
configured channels to be viewed.
For example, if channels 2 and 3 are configured, for the maximum capacity of the 1st range:
1st range capacity channel 1 (

). Press
.
1st range capacity channel 2 (

).
Press
.
1st range capacity channel 3
(  ).
3.9 Selecting the Channel to be Displayed
It is possible to select the channel to be displayed using the key, if the instrument is configured in the
independent channels mode . This functionality does not work in the primary mode. See Table 4-3 on page 33
functioning mode

.
1. Press and hold . The currently selected channel displays first followed by  displays.
2. Press or to select the channel to be displayed.
3. Press to confirm.
3.10 Selecting the Operating Mode
In addition to the standard weighing mode, with tare deduction and transmission of data, the instrument can be set
to carry out various operational functions.
Each operating mode activates certain LEDs.
To set the operating mode:
1. Turn on the instrument and press while the firmware version displays.  displays.
2. Press to enter the menu.
3. Press or until

displays. Press to enter the menu.
4. Press or to scroll through the options.
• 

= Unit of measure conversion ( Section 3.10.1 on page 19 )
•  = Net weight / gross weight conversion ( Section 3.10.2 on page 19 )
•  = Input / output weighing ( Section 3.10.3 on page 19 )
• 

= Multi-scale repeater ( Section 3.10.4 on page 20 )
•  = Alibi memory ( Section 3.10.5 on page 23 )
• 

= Single scale repeater ( Section on page 24 )
•  = Sensitivity times ten ( Section 3.10.7 on page 26 )
•  = Hold the weight value on the display ( Section 3.10.8 on page 26 )
•  = Peak detector ( Section 3.10.9 on page 26 )
•  = Horizontal totalizer ( Section 3.10.10 on page 27 )
•  = Vertical totalizer ( Section 3.10.11 on page 28 )
• 

= Counting ( Section 3.10.12 on page 28 )
C