Rice Lake SCT-1100, Техническое руководство

Страница: 72 / 88

68 SCT-1100 Weight Transmitter
Configuration:

Intelligent repeater reads all the string; the operator can select, in the technical setup, the string’s start and the part
of this referred to the weight. Both RS232 and RS485 can be used. The repeater keys are disable.
Configuration:
1. Enter “PC mode” step, and set   displays.
2. Press . if the communication is correct t  displays and after, it receives the string.
3. Select the start of the string and press .  displays.
4. Select the first and the last characters of the weight.
5. Escape from the setup and save the configurations.
Return to the weigh mode.

Repeats the weight of the remote scale connected, with this protocol it is possible to simulate and keys.
The parameters to set in the repeater are described in Section 4.2.2 on page 33 and they are variable depending on
the connected scale.
SCT-1100 (repeater)
  : 
 
 
  / 
Table 6-13. DFW
SCT-1100 (repeater)
  : 
 
 
 
/

Table 6-14. 3590/CPWE
SCT-1100 (repeater)
  : 
 
 
  / 
Table 6-15. DFW
SCT-1100 (repeater)
  : 
 
 
 
/

Table 6-16. 3590/CPWE