Rice Lake MSI-8000 Скачать руководство пользователя страница 23

Страница: 23 / 50

ScaleCore Connect

Rice Lake Weighing Systems

●

3.0

ScaleCore Connect

ScaleCore Connect

can be used to program and configure all MSI products using

ScaleCore

software.

This application provides a complete solution for

ScaleCore

family product configuration and setup. It allows complete backup,

copy and restore of a scale configuration including calibration.

3.1 Installation

Install the

ScaleCore Connect

Software onto a computer for setting up multiple products.

3.1.1 System Requirements

Specifications subject to change without notice.

Typical

Windows

Operating System

Display: 800 x 600 or greater
Built-in serial port or USB to serial port adapter

FTDI chip set required (Tripp-Lite USB/Serial Adapter [PN 153603] recommended)

JAVA JRE 1.7 or Newer

To download and install JAVA JRE:

https://java.com/en/download/manual.jsp

3.1.2 Install Program

To install:

1. Open the Rice Lake website and navigate to the

MSI software page

and scroll to the ScaleCore Connect file.

2. Download the

ScaleCore Connect

software to the computer.

3. Extract the zip file to generate the

ScaleCore Connect

folder.

4. Open the folder and double click on

ScaleCoreConnect_XX-XX.exe

Folder structure must be kept intact. Application will not work without the companion folder.

5. A security warning may display, press

Run

to continue.

ScaleCore Connect

will automatically connect to any connected

ScaleCore

device. If a device was not connected to

the PC before launching the application, connect device and press

to establish the connection for

configuration/setup of the device.

Make sure USB/serial drivers are installed and up-to-date If the scale does not appear.

Figure 3-1.

ScaleCore Connect

Main Display

Note

Содержание MSI-8000



















































Результаты поиска

Содержание MSI-8000

Отзывы:

Бренды по названию

Популярные бренды

Rice Lake MSI-8000, Техническое руководство

Результаты поиска

Содержание MSI-8000

Отзывы:

Бренды по названию

Популярные бренды