Rice Lake DIGI DC-200 Скачать руководство пользователя страница 19

Страница: 19 / 122

2.8

Setting Time and Date

Once you set the internal clock for the correct day and time it will continue to keep them, even when the scale is
off, using the internal battery on the main board. The procedure below can also be used to adjust the time when
moving from Standard to Daylight Savings Time or when the scale is moved to a new facility in a different time
zone.

Note:

SPEC 05 - DATE ORDER and SPEC 06 -TIME FORMAT allow you to set the format for date and time that

you prefer the scale to display. The defaults are Month/Date/Year for date and 12 hour for time. To change these
specifications, see Section 2.9.1.

1. Press the

MODE

key twice until the display shows

ITEM CODE PROGRAMMING

. The

annunciator,

indicating the Programming Mode, will illuminate.

2. Press the

(plus) or

–

(minus) keys to scroll through the programming options until you see the

PROGRAM DATE

screen. Enter the current date using the numeric keypad. For months or days from 1 to

9, enter a leading zero. (Ex. In a MM-DD-YY format, May 8, 2003 would be entered as 050803.) Press
the

REPRINT

key to store the data in temporary memory and move to the time programming mode.

3. Enter the current time using the numeric keypad. For numbers from 1 to 9, enter a leading zero. (Ex. In a

12 hour format, 3:06 pm would be entered as 0306.) If SPEC 06 - TIME FORMAT is set to a 12 hour
format, you use the

and

keys to toggle between AM and PM.

4. Press the

CODE

key to save the data or press the

PIECES

key followed by the

CLEAR

key to exit without

saving the data.

5. To return to the Stand-by Screen in the Operation Mode, press the

MODE

key three times.

2.9

Configuration Settings

This section presents the setup and configuration of the DC-200/300 counting scale to be used specifically by
distributors and service technicians. Configuring these specifications allow you to tailor the DC-200/300 to your
specific applications.

Setting the specifications allows you to modify the functionality of the DC-200/300. Use the tables in this section
to view the options you can modify. For example, if you want the function allowing you to print labels by
pressing the

+/-

keys as well as pressing the

REPRINT

key to work on the DC-200/300, refer to the DC-200/300

specification table and locate

SPEC 34 - PRINT WHEN PRESS +/- KEY

. The default for SPEC 34 is

, which

means that the

PRINT WHEN PRESS +/- KEY

function is turned off or disabled. To turn it on or enable it, change

the SPEC setting to

2.9.1

Configuring Specification 141 and 142 Settings from the Scale Keyboard

The following tables list the DC-200/300 specifications and their corresponding default values. The default
values are automatically set when the scale’s memory is set by the dealer for the country of operation.

SPEC 00 through SPEC 71 (Table 2-1) are customer specifications and use the 141 access code, while SPEC 600
through SPEC 646 (Table 2-2) are weight and measurement specifications, and use the 142 access code. In
programming specifications, the

REPRINT

and

–

(minus) keys allow you to move to the next or previous

specification without saving changes to the SPEC code you were just in.

Customer Specification (141 Settings)

1. To configure customer specifications, press and hold the

REZERO

key and enter

141

using the numeric

keypad. The first SPEC code, SPEC 0 is displayed, with