RHOTHETA User Manual RT-800
Page 127 of 192
To change the UTC time value, press the hotkey “Edit Value”, while “Current UTC Time” is
marked (s. Fig. 131, position 1).
Following dialog appears (s. Fig. 132).
Fig. 132 Changing the UTC time
o
Enter the new value for the UTC time in the “New Setting” input field, using the numeric
buttons of the DCU keypad (“hh:mm”).
o
Use the “Automatic” hotkey (s. Fig. 132, position 1) to adopt the GPS time value (only if
GPS data is available).
o
By default the current seconds value is inherited to the new setting. To reset the
seconds value to “00”, press the “Reset seconds” hotkey (s. Fig. 132, position 2).
o
Use the “Set Default” hotkey (s. Fig. 132, position 3) to reset the value to the default
value (internal time of the DCU real time clock).
Note
The default time setting can differ from the actual UTC time.
o
Confirm the changed value with “OK” or press “ESC” to leave the dialog without
changing the current setting.
Timezone
With this setting the time zone of the local time can be selected.
To change the time zone value, press the hotkey “Edit Value”, while “Timezone” is marked (s.
Fig. 133, position 1).
