¾
Adjustable Edge Guide: After setting up the Paper Stop, place a sheet in the
APES-14 Ejector against the Paper Stop, then move the Adjustable Edge Guide
against the page and tighten the screw. This guide is primarily used while
punching Portrait documents to better stabilize the top of the sheet against the
Paper Stop. However it can be used on Landscape documents also if the user
finds it more comfortable.
¾
Top Rear (and Front) Paper Deflectors: These guides make paper insertion
into the APES-14 and HD punch easier and quicker. Some operators may prefer
reversing guide positions or simply removing the Top Rear Deflector for better
ease. These next three images illustrate the suggested deflector setups;
Fig. V
This image shows the large Top Front Paper
Deflector with the Adjustable Edge Guide in the
forward configuration. This configuration is best
suited for landscape 8 ½” x 11” paper.
Fig. W
This image shows Figure V along with the small Top
Rear Paper Deflector installed. This configuration is
preferred for portrait 8 ½” X 11” paper.
Fig. X
This image shows Figure W, but with the second
large Rear Paper Deflector replacing the small Rear
Paper Deflector. This configuration can be used with
portrait 8 ½” X 11 paper to gain extra support. With
most larger paper size jobs, you may prefer this
configuration.
Page 14
Issue “A1” 09/03 PDI Part # 900600 www.RHIN-O-TUFF.com
