¾
If the reception fails to align with the Ejector Top Plate (on older HD punches with
shorter feet) you will need to adjust the Reception Pivot Block with two
adjustment screws at the base of the Pivot Block Mount just under the lid on the
inside of the Reception.
Fig. H
¾
Mount the APES-14 reception to the APES-14 Ejector Base Plate with the two
supplied large 2-winged mounting push pins thru assembly holes in both the
reception and Ejector Plate.
¾
Mount the Reception Paper Stop to the Reception Paper Guide. See Figure
I
.
Fig. I
Page 7
Issue “A1” 09/03 PDI Part # 900600 www.RHIN-O-TUFF.com
