3) Preparing your HD-7000 or HD-6500 for the APES-14:
¾
Unplug HD-7000 or HD-6500 from outlet! Hazardous voltage inside!
Crush hazard! Keep hands away from moving parts! See Figure B.
¾
Unplug foot pedal and store (The APES-14 has a foot pedal). See Figure B.
¾
Using a Philips screwdriver in a counter clockwise motion unlock the Safety
Screw. See Figure A. Only ½ turn is needed. (UL machines only).
Fig. A
¾
Raise the lid on your HD punch and remove the Paper Stop Assembly by
grasping the nut just under the cover and turning the knob until the
assembly clears the machine. See Figure B.
¾
Close the lid and REPLACE the SAFETY SCREW to its locked position.
¾
Re-assemble the Paper Stop into one piece and Store.
Fig. B
¾
Your APES-14 came with two required Tan Interface Blocks (Figure C page
5) that are 9” long by ¾” Square, and four ¼-20 X 1-1/4” socket head cap
screws and an Allen wrench and Torx wrench. On each side of the HD
punch locate the two top most Allen screws (or Torx screws) and remove
using the short side of the wrench for leverage turning counter clockwise.
Page 4
Issue “A1” 09/03 PDI Part # 900600 www.RHIN-O-TUFF.com
