Reznor VS15LHE8, Инструкция по установке и эксплуатации

Страница: 54 / 60

STEP 3
Fit new burner controller.
Refit HT leads and refit burner controller to
wiring harness.
Test product and close access door.
7.5 Honeywell VK Gas Valve
Replacement
STEP 1
Remove the burner assembly as described in
section 4.3 on page 47. Open the right hand
access door and detach the burner controller
from the wiring harness.
STEP 2
Open the left hand access door and detach the
impulse hoses from the air pressure switch.
STEP 3
Remove the 4 screws holding the burner head
onto the burner assembly.
The burner head can now be detached, discon-
nect the impulse tube and the burner head
wiring.
STEP 4
Detach the two screws holding the front of
the gas valve.
STEP 5
Remove the four screws holding the rear burner
plate in position.
Remove the rear plate.
The jet carrier, gas inlet, and wiring harness can
now be detached from the gas valve.
STEP 6
The two screws retaining the gas valve can
then be removed.
STEP 7
The gas valve can now be replaced. Ensure the
correct type of gas valve is used, see Section
5.1 for more details. Refit all components in
reverse order. Set gas pressures to data badge or
as per section 1.12 and ensure reliable burner
performance. Test product and close access
doors.
54