Reznor VS15LHE8, Инструкция по установке и эксплуатации

Страница: 29 / 60

2.2.6 Reflectors, U-Bend reflector
All reflectors must be positioned/attached
to the brackets exactly as detailed in the
assembly drawings.
2.2.6.1 First U-Tube V reflector.
U-tube heaters have two types of reflectors
– a short U-Bend reflector and longer heater
reflectors with a central V.
The V reflector adjacent to the U-Bend
requires a closing plate to be fitted before
installation on the heater. This is fixed
inside the central V with 4 off M5 pozi set
pins and washers. Note the direction of the
flanges is correct. This reflector assembly is
placed onto the heater so that it rests on the
last two brackets, with the reflector closing
plate at the U-Bend end of the heater.
2.2.6.2 Intermediate U-Tube V reflector(s)
Intermediate V reflector(s) are fitted after
the first reflector and before the last V reflec-
tor. These can be fitted in any orientation.
Place the reflector on the heater so that it
overlaps the previous reflector and sits on
top of the next bracket. Repeat process for
all intermediate reflectors.
Intermediate V reflector
Last V reflector
U-Bend reflector
First V reflector
2.2.6.3 Final U-Tube V reflector.
The final V reflector is placed on the heater
so that it overlaps the previous reflector
and sits on top of the burner end bracket.
Ensure the burner end cap fixing holes are
at the burner end of the heater.
M5 inserts should be
facing outwards towards
the U-Bend.
Figure 28. Reflectors
Figure 29.
Final U-Tube V reflector
Burner end cap fixing holes
Figure 30. U-Bend reflector
2.2.6.4 U-Bend reflector.
The U-Bend reflector is fitted last by over-
lapping the first V reflector, and secured to
the V reflector closing plate with 2 off M5
pozi set pins and washers.
Ensure the U-Bend reflector is level before
fully tightening the fixings.
Refer to section 2.2.6.6 for details of fixing
all reflectors to the brackets.
Note: All the reflectors must be positioned/attached to
the brackets exactly as they are detailed in the assembly
drawings.
M5 pozi set pins and washers
29