Reznor VS15LHE8, Инструкция по установке и эксплуатации

Страница: 6 / 60

90°
90°
The burner must be positioned on the
lowest side of the heater and mounted on
a level horizontal plane.
This is to ensure the gas valve coils are
not installed beyond 90° from the upright
position. See Figure 2.
The burner and outlet tubes may be
reversed on U-Tube models 30-50 to allow
more flexibility when angle mounting. See
Figure 3.
Note:
When Angle mounting a U tube heater, the
burner MUST be located on the bottom (lowest) tube
(see Figure 2)Models 15-25 U-Tube heaters cannot be
installed angle mounted
U Tube U Tube Chain length Linear
Linear Chain
length Linear Chain length
Heater Size Required angle Eye bolt position 1 Chain length Eye bolt position 10 Eye bolt position 1 Chain length Eye bolt position 6 Eye bolt position 8
15 - 25 45° N/A N/A 465 mm 531 mm N/A
30 - 50 45° 491 mm 743 mm 433 mm N/A 572 mm
Table 2 – Angle mounting
Figure 1. Angle mounting using the wall mounting bracket
Figure 2.
Figure 3.
1
6
8
10
6