Reznor VS15LHE8, Инструкция по установке и эксплуатации

Страница: 31 / 60

2.2.10 Burner Assembly.
Slide the burner assembly onto the tube at
the burner end (RIGHT HAND TUBE for
U-Tube heaters when viewing heater from
the burner end), ensuring it is fully engaged.
Lift burner assembly square to tube and
secure grub screws. Do not apply sealant!
CAUTION
When angle / wall mounting, the burner
MUST remain horizontal to the floor and
on U-Tube heaters be located on the
bottom (lowest) tube. (See section 1.6
on page 5 for more details)
.
2.2.11 Outlet Assembly.
2.2.11.1 U-tube fan assembly.
Slide the fan onto the left hand tube when
viewing from the burner end, ensuring it
is fully engaged.
The fan discharge can face either vertically
or horizontally for flued appliances.
Any un-flued appliances must discharge
horizontally away from the burner. Secure
grub screw. Do not apply sealant!
2.2.11.2 Linear fan assembly.
Slide the fan onto the tube from the outlet
end, ensuring it is fully engaged. The fan
discharge can face either vertically or
horizontally (bottom discharge) for flued
appliances. Un-flued appliances must
discharge horizontally (bottom discharge).
Secure grub screw.
CAUTION
Do not apply sealant!
2.2.11.3 Double Linear Fan Assembly.
Slide the condensate box flange onto the
outlet end of the tube ensuring it is fully
engaged. The fan must be in the upright
position.
Secure grub screw.
CAUTION
Do not apply sealant!
Note: The fan assembly must be located with the fan
outlet vertical.
Figure 35. Burner assembly
Figure 36. U-Tube fan assembly
Figure 37. Linear fan assembly
Figure 38. Double linear fan assembly
31