REXROTH Fv Series, Инструкция по эксплуатации

Страница: 99 / 222

7.4.2 Category S: Standard Parameters
Group S0: V/F Control
Parameters of group S0 are only valid when 'Control mode' [b1.03] is ‘0: V/F
control’.
S0.00
V/F mode Factory default 0
Setting range
0: Linear mode
1: Square mode
2: User-defined multipoint mode
Minimum unit 1
● 0: Linear mode
–
Suitable for constant torque load
(shown as 0 in
chapter "Group S0: V/F Control" on page 97 ).
● 1: Square mode
–
Suitable for variable torque loads
(shown as 1 in
chapter "Group S0: V/F Control" on page 97 ).
Fig.7-20: Linear and square V/F curves
● 2: User-defined multipoint mode
–
Used to set a user defined V/F curve with parameters [S0.01] to
[S0.06]. Suitable for special applications (shown in chapter "Group
S0: V/F Control" on page 97 ).
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 97/219
Parameter Settings