REXROTH Fv Series, Инструкция по эксплуатации

Страница: 84 / 222

Group E4: Protection and Fault Parameters
Type
Function
code
Name Setting range
Minimum
unit
Factory
default
Attribute
Protection
parameters
E4.00
Software over voltage
protection threshold
790 − 820 V 1 V 810 V ◆
E4.01
Stall over voltage
function 0: Deactivated
1: Activated
1 0 ◆
E4.02
Stall over voltage
protection level 120.0 % − 150.0 %
(of rated converter peak voltage)
0.1 % 130.0 % ◆
E4.03
Stall over current
protection level 20.0 % − 200.0 %
(of rated converter output current)
0.1 % 150.0 % ◆
E4.04
Motor over load
protection
0: Inactive
1: Heat protection active at low-speed
2: Heat protection inactive at low-speed
1 1 ◇
E4.05
Motor over load
protection factor
50.0 % − 110.0 % 0.1 % 100.0 % ◇
E4.06 Phase loss protection
0: Both input and output phase loss protec‐
tion active
1: Only input phase loss protection active
2: Only output phase loss protection active
3: Both input and output phase loss protec‐
tion inactive
1 0 ◇
E4.07 Fault relay setting
0 − 3
bit0:
0: Inactive for under voltage
1: Active for under voltage
bit1:
0: Inactive for auto reset
1: Active for auto reset
1 0 ◇
E4.08
Number of fault reset
attempts 0 − 3
(0: Inactive for auto reset)
1 0 ◆
E4.09
Interval between reset
attempts
2 − 60s 1s 10s ◆
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
82/219
Parameter Settings