REXROTH Fv Series, Инструкция по эксплуатации

Страница: 89 / 222

● 0: Output frequency
● 1: Output rotation speed
● 2: Set output frequency
● 3: Set rotation speed
● 4: Output voltage
● 5: Output current
● 6: Output power
● 7: DC bus voltage
● 8: Torque current
● 9: Excitation current
● 10: User-defined reference value
● 11: User-defined output value
● 12: Reference torque
● 13: Reserved
Switch between the 14 monitoring values with the ►► key.
b0.10
Scale factor of output frequency Factory default 100 %
Setting range 0.1 % − 1000.0 % Minimum unit 0.1 %
● Valid only for ‘LCD display value in run mode’ [b0.08] and ‘LCD display
value in stop mode’ [b0.09] = 10 or 11.
● ‘LCD display value in run mode’ [b0.08] and ‘LCD display value in stop
mode’ [b0.09] equals ‘output frequency’ multiplied by ‘Scale factor of
output frequency’ [b0.10].
b0.11
Parameter filter setting Factory default 0
Setting range 0 − 3 Minimum unit 1
● Only parameters of the selected groups are visible.
b0.11 Parameter groups to be read and set
0
b
1 b, S
2 b, S, E
3 b, S, E, H
Fig.7-13: Parameter filter range
b0.12
Heat sink temperature Factory default Detected value
Setting range 25 − 100 °C Minimum unit 1 °C
● Displays the heat sink temperature (in °C).
–
'――' is displayed when the temperature is lower than 25 °C.
– Overheat protection activates at 85 °C.
b0.13
Total running time Factory default 0 hour
Setting range 0 − 65535 hours Minimum unit 1 hour
● Displays the total running time of the frequency converter.
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 87/219
Parameter Settings