REXROTH Fv Series, Инструкция по эксплуатации

Страница: 71 / 222

7.3 Parameters Functions
7.3.1 Category b: Basic Parameters
Group b0: System Parameters
Type
Function
code
Name Setting range
Minimum
unit Factory
default
Attribute
System
parame‐
ters
b0.00 User password 0 − 65535 1 0 ◇
b0.01 LCD language 0: Chinese; 1: English 1 0 ◇
b0.02
Restore
factory
default
0: No action
1: Restore parameter to factory default
Note: The value is automatically set to 0 af‐
ter restoring factory default.
1 0 ◆
b0.03 Parameter copy
0: No action
1: Copy from converter to operating panel
2: Copy from operating panel to converter
Note: The value is automatically set to 0 af‐
ter parameter copy.
1 0 ◆
b0.04 Mains voltage 380 − 480 V 1 V 380 V ◆
b0.05 PWM frequency 1.0 − 15.0 kHz 0.1 kHz
Depends
on model
◇
b0.06
Automatic adjustment
of PWM frequency 0: Off
1: On
1 1 ◆
b0.07 LCD backlight mode 0: Energy saving; 1: Always on 1 0 ◇
b0.08 LCD display in run mode
0: Output frequency
1: Output rotation speed
2: Set output frequency
3: Set rotation speed
4: Output voltage
5: Output current
6: Output power
7: DC bus voltage
8: Torque current
9: Excitation current
10: User-defined reference value
11: User-defined output value
12: Reference torque
13: Reserved
1 0 ◇
b0.09 LCD display in stop mode 1 2 ◇
b0.10
Scale factor of output fre‐
quency
0.1 % − 1000.0 % 0.1 % 100.0 % ◇
b0.11
Parameter
filter setting
0: b Parameters
1: b, S Parameters
2: b, S, E Parameters
3: b, S, E, H Parameters
1 0 ◇
b0.12 Heat sink temperature Read-only 1 ℃
Measured
value
◎
b0.13 Total running time 0 − 65535 hours 1 hour 0 hour ◎
b0.14 Firmware version Read-only — — ◎
b0.15 Reserved 0, 1 1 0 ◆
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 69/219
Parameter Settings