REXROTH Fv Series, Инструкция по эксплуатации

Страница: 203 / 222

ID IND VALUE_high VALUE_low
Request data frame
of PKW area
0x2000 0x0800 0x0000 0x0001
Response data
frame of PKW area 0x7000
0x0800 0x0000 0x0007
Fig.12-44: Example 9_request and response data frames of PKW area
PZD Process Data Area
When the master is sending a request message to the slave , PZD1 and
PZD2 in PZD process data area are respectively corresponding to control
word (CW) and reference frequency (REF) and PZD3 - PZD10 (number de‐
pending on PPO type) are written as 0. When the slave returns a response
message to the master, PZD1 and PZD2 in PZD process data area are re‐
spectively corresponding to status word (SW) and actual output frequency
(ACT), and PZD3-PZD10 are corresponding to status monitoring values
(such as output current, output voltage, AC bus voltage, etc.) set by function
code parameter [H0.04] – [H0.07].
●
Control Word (CW)
Bit Value Description
15 – 8 — Reserved
7
0 Control active
1 Control inactive
6
0 Inactive
1 SCI stop acceleration
5
0 Fault reset incative
1 Fualt reset active
4
0 E-Stop inactive
1 E-Stop active
3
0 Inactive
1 Stop as parameter setting mode
2
0 Forward
1 Reverse
1
0 Jog inactive
1 Jog active
0
0 Run inactive
1 Run active
Fig.12-45: Bit definition of control word
When bit7 is 1, command is invalid.
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 201/219
Communication Protocols