REXROTH Fv Series, Инструкция по эксплуатации

Страница: 119 / 222

E0.15
Maximum input pulse frequency Factory Default 20.0 kHz
Setting range 1.0 − 50.0 kHz Minimum unit 0.1 kHz
E0.16
Curve 1 minimum reference Factory Default 0.0 %
Setting range 0.0 % − [E0.18] Minimum unit 0.1 %
E0.17
Frequency corresponding to curve 1 mini‐
mum reference
Factory Default 0.00 Hz
Setting range 0.00 − [b1.06] Minimum unit 0.01 Hz
E0.18
Curve 1 maximum reference Factory Default 100.0 %
Setting range [E0.16] − 100.0% Minimum unit 0.1 %
E0.19
Frequency corresponding to curve 1 maxi‐
mum reference
Factory Default 50.00 Hz
Setting range 0.00 − [b1.06] Minimum unit 0.01 Hz
E0.20
Curve 2 minimum reference Factory Default 0.0 %
Setting range 0.0 % − [E0.22] Minimum unit 0.1 %
E0.21
Frequency corresponding to curve 2 mini‐
mum reference
Factory Default 0.00 Hz
Setting range 0.00 − [b1.06] Minimum unit 0.01 Hz
E0.22
Curve 2 maximum reference Factory Default 100.0 %
Setting range [E0.20] − 100.0 % Minimum unit 0.1 %
E0.23
Frequency corresponding to curve 2 maxi‐
mum reference
Factory Default 50.00 Hz
Setting range 0.00 − [b1.06] Minimum unit 0.01 Hz
E0.24
Analog reference forward/reverse dead zone
control value at -10 − +10 V
Factory Default 0.0 %
Setting range 0.0 − 30.0 % Minimum unit 0.1 %
● When VR1, VR2, +I, or pulse frequency (PULSE) input is used as refer‐
ence frequency channel, the relationship between reference channel
and reference frequency is shown in fig. 7-41 "Reference frequency
channel and reference frequency" on page 117 .
Fig.7-41: Reference frequency channel and reference frequency
● For reference frequency signals of after gain and filter processing, their
relationship with the set frequencies is determined by curve 1 or curve
DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv Bosch Rexroth AG 117/219
Parameter Settings