REXROTH Fv Series, Инструкция по эксплуатации

Страница: 72 / 222

Group b1: Basic Parameters
Type
Function
code
Name Setting range
Minimum
unit Factory
default
Attribute
Basic
parame‐
ters
b1.00
Frequency
setting
mode
0: Set by operating panel potentiometer
1: Set by operating panel
2: Set by external analog terminals
3: Set by pulse frequency
4: Set by external Up/Down terminals
5: Set via communication
1 0 ◆
b1.01
Saving options
of digital set
frequency
0: Not saved when powered off or stopped
1: Not saved when powered off; saved when
stopped
2: Saved when powered off; not saved when
stopped
3: Saved when powered off or stopped
1 0 ◆
b1.02
Converter
control commands
0: Set control commands via operating pan‐
el
1: Set control commands via external termi‐
nals
2: Set control commands via communication
1 0 ◆
b1.03 Control mode
0: V/F control (V/F)
1: Senseless vector control (SVC)
2: Field oriented vector control (FOC)
1 0 ◆
b1.04 Digital set frequency b1.07 − b1.06 0.01 Hz 50.00 Hz ◇
b1.05 Maximum frequency 50.00 − 400.00 Hz 0.01 Hz 50.00 Hz ◆
b1.06 Upper limit frequency b1.07 − b1.05 0.01 Hz 50.00 Hz ◇
b1.07 Lower limit frequency 0.00 − b1.06 0.01 Hz 0.00 Hz ◇
b1.08
Operating panel
controlled direction 0: Forward rotation
1: Reverse rotation
1 0 ◇
Acc.
Dec.
time
and
modes
b1.09 Acceleration time 1 0.1 − 3600.0s 0.1s 10.0 s ◇
b1.10 Deceleration time 1 0.1 − 3600.0s 0.1s 10.0 s ◇
b1.11
Acceleration/deceleration
mode 0: Linear mode
1: S-curve mode
1 0 ◆
b1.12
Time of S-curve
rising section 1 0.0 % − 40.0 %
(of ‘Acceleration time 1’ [b1.09])
0.1 % 20.0 % ◆
b1.13
Time of S-curve
rising section 3 0.0 % − 40.0 %
(of ‘Acceleration time 1’ [b1.09])
0.1 % 20.0 % ◆
b1.14
Time of S-curve
falling section 4 0.0 % − 40.0 %
(of ‘Deceleration time 1’ [b1.10])
0.1 % 20.0 % ◆
b1.15
Time of S-curve
falling section 6 0.0 % − 40.0 %
(of ‘Deceleration time 1’ [b1.10])
0.1 % 20.0 % ◆
Bosch Rexroth AG DOK-RCON02-FV*********IB01-EN-P
Rexroth Frequency Converter Fv
70/219
Parameter Settings