15
ENGLISH
GB
Timed Frosting Cycle
This cycle lowers the temperature at the
core of the product from
+ 90 ° C
to
- 18 ° C
in the
time set by the user. We recommend performing
some test cycles to determine the needed time to
properly chill the product. We remind you that
acquired and eventually saved times are to be
considered valid for the exclusive use of the same
product type and at the same amount per cycle.
To switch to a timed cycle, press inside the
frosting screen, the area
: the system will
shut down the temperature cycle area
and
illuminate the timed cycle area
.
By pressing the area
it is
possible to change the operating cell temperature.
By pressing the area
it is
possible to change the duration of the frosting
cycle.
By pressing the area
it is
possible to change the fan speed during freezing.
Pressing the area
it is possible to change
the cell temperature
and the speed of the
fans
during the conservation phase.
Press the area
to enable the SOFT phase:
the relative area will be enlightened
.
In this case the frosting cycle will be divided into
three stages :
SOFT frosting
standard
frosting
conservation
Pressing the
area, the controller displays
the “advanced setting” screen :
Within this mode, following values can be
changed :
cell temperature
during the SOFT phase ;
duration of the
SOFT phase ;
cell temperature
during the conservation phase ;
fan speed during the SOFT
phase ;
fan speed during the
conservation.
To exit the “advanced blast chilling” screen press
on the upper left display area.
To confirm the frosting cycle settings press the
right lower area
.
