30
ENGLISH
GB
To change the values within the single phases,
press in the area involved.
E.g. to change the temperature of the cell during
the slow cooking, press in correspondence of
phase 1; the screen of the first phase will be
showed.
To run the cycle press in correspondence of the
area
.
Following screenshot will be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system.
If the maintaining phase has been selected, by
pressing the area
it is possible to abort the
slow cooking phase and switch directly to the
maintaining phase.
If the blast chilling phase has been selected, by
pressing the area
it is possible to abort the
slow cooking phase and switch directly to the
blast chilling phase.
To abort the current cycle press for at least three
seconds the area
.
Number of the current phase
Time Left
Freezing symbol
Timed cycle symbol
