21
ENGLISH
GB
Fish Sanitization Cycle
The function “Fish Sanitization” is divided into
three phases :
1. negative temperature blast chilling phase
2. maintaining
phase
3. conservation
phase
By selecting the sanification cycle the system
shows the first phase screen :
By pressing the area
it is
possible to change the operating cell temperature
during the blast chilling phase.
By pressing the area
it is
possible to change the product temperature at the
end of the cycle.
By pressing the area
it is
possible to change the fan speed.
Press in correspondence of the area
at the
right top to step to the second phase.
By pressing the area
it is
possible to change the operating temperature of
the cell during the maintaining phase.
By pressing the area
it is
possible to change the duration of the maintaining
phase.
By pressing the area
it is
possible to change the fan speed.
Press in correspondence of the area
at the
right top to step to the third phase.
By pressing the area
it is
possible to change the operating cell temperature
during the conservation phase.
By pressing the area
it is
possible to change the fan speed.
To run the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
.
Number of the current phase
Elapsed time
