Rethink Robotics Sawyer Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 220

Rethink Robotics Sawyer Скачать руководство пользователя страница 136

129

Intera 5.3

Fieldbus Devices

Fieldbus Devices

For the latest and most detailed information on Sawyer and Intera 5, please refer to the Online User
Guide at:

mfg.rethinkrobotics.com/intera.

The Rethink Robotics support page is here:

The Industrial Fieldbus Protocols available on the Sawyer robot include:

•

PROFINET

•

EtherNet/IP

DISCLAIMER

Any advice provided to you relating to the integration of a Rethink Robotics product with any third
party product into to your facility is provided “as is.” Because Rethink Robotics does not have
access to the systems you are using, nor does Rethink Robotics have any control over how you
may implement any integration with third party products, Rethink Robotics assumes no liability for
this limited advice.

Setup Notes

Depending on which Fieldbus protocol is used, additional files for the master device may be
required. Please review the following:

•

“Appendix G1: Intera PROFINET Reference” on page 178

•

“Appendix G2: Intera EtherNet/IP Reference” on page 193

The Fieldbus protocol should be enabled on the controller, which can be properly configured from
the Field-Service-Menu (FSM) on the robot.

«
...
134
135
136
137
138
...
»

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов