manualshive.com logo in svg

Rethink Robotics Sawyer, Оригинальное руководство пользователя, Страница: 200 / 220

Поделиться
Скачать
Rethink Robotics Sawyer Скачать руководство пользователя страница 200

193

Intera 5.3

Appendix G2: Intera EtherNet/IP 

Reference

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you 
see the Online User Guide at: 

mfg.rethinkrobotics.com/intera.

 The Rethink Robotics support page 

is here:

 

Rethink Support.

 

Overview

The data tables in this document describe the format and byte addressing of the EtherNet/IP 
Assemblies defined in the EDS (Electronic Data Sheet) for Intera. Multiple connection options are 
available with the various Assemblies including a different mix of variable types and numbers, so 
the best option can be chosen for each application.

Default Connection - Standard Assemblies

The default EtherNet/IP connection defines a 'Standard To-Robot Assembly' and a 'Standard From-
Robot Assembly', each of which include a fixed number of general purpose variables of each data 
type (Booleans, Integers, Floats, and Strings). For the Assembly sent from the robot, there are addi-
tional, automatically filled-in data fields related to the robot status, task status, and the state of the 
safety signals. More information on these status fields can be found under the State Flags Defini-
tions section of this document.

Setup Resources

The Rethink Intera EDS will be necessary to setup the Intera Adapter Device on the PLC.

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов