manualshive.com logo in svg

Rethink Robotics Sawyer, Оригинальное руководство пользователя, Страница: 3 / 220

Поделиться
Скачать
Rethink Robotics Sawyer Скачать руководство пользователя страница 3

3

Intera 5.3

Welcome!

Welcome!

Thank you for purchasing Intera 5 software and Sawyer, our revolutionary new high performance collaborative 
robot. This user guide is designed to help you get started using Intera and Sawyer by providing you with an 
overview of the software and instructions on how to set up the Sawyer robot.  

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you see the Online 
User Guide at: 

mfg.rethinkrobotics.com/intera.

 The Rethink Robotics support page is here:

 

Rethink Support.

 

Safety Statement

Complying with ISO 10218-2 requires performing a risk assessment of each application to determine the 
needed safety performance and safeguarding. ANSI RIA R15.06-2012 is a U.S.-
national adoption of ISO 10218-1 & 2.

Users should exercise caution while training the robot and practicing motions. The risk of injury
is increased when using custom end-effectors, movements that lead with the end effector, and potentially 
hazardous work pieces.

Rethink Robotics recommends the use of safety glasses when interacting with robots, as is common with 
other equipment used in industrial environments.

The safety of any system incorporating Sawyer is the responsibility of the assembler of the system.

For additional information, reference 

Rethink Robotics’ Safety Documentation

.

General Information

  CAUTION:  This symbol indicates that hazards may be present with the equipment.  This docu-

mentation provides information on the nature of potential hazards and any actions which have to be taken to 
avoid them.

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов