Rethink Robotics Sawyer Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 220

Rethink Robotics Sawyer Скачать руководство пользователя страница 4

4

Intera 5.3

Welcome!

Intended use:

Sawyer is a collaborative robot intended for use in machine tending applications in manufacturing.

Warnings

Rethink Robotics’ collaborative robots are provided as partly completed machinery. The

robots are not supplied for specific applications. The integrator and/or end user is responsible for
ensuring that all appropriate regulations including but not limited to safety, electrical, and environ-
mental regulations are met for the appropriate regions or countries where the application will be
deployed.

The information provided with this robot and online does not cover how to design, fabricate,

install and commission a complete robotic application. If Rethink Robotics’ collaborative robots are
used to create a collaborative robotic workcell, the integrator and/or end user is responsible for
complying with the industrial robot safety standards relevant for the region where the robotic work-
cell will be deployed will apply. Examples of such standards are EN ISO 10218:2011, ANSI/RIA
R15.06:2012, CSA Z434:2014, and JIS B 8433:2015.

As part of complying with these standards, a risk assessment must be performed to identify

and eliminate, substitute or acceptably mitigate risk associated with hazards present in the applica-
tion. For more information see the relevant standards and associated documentation for your
region.

Note that it is possible to integrate and use Rethink Robotics’ collaborative robots in such a

way that presents an injury hazard if contact is made with a person. The integrator and/or end user
is responsible for evaluating the safety of the robotic application and determining and implementing
any risk reduction measures to eliminate, substitute or acceptably mitigate the risks associated with
the hazards. The integrator and/or end user assumes all responsibility for damage and/or harm
caused by use of the robot in a hazardous manner and agrees to indemnify Rethink Robotics from
all liability relating to such damage or harm.

«
...
2
3
4
5
6
...
»

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов