Rethink Robotics Sawyer Скачать руководство пользователя страница 149

Страница: 149 / 220

142

Intera 5.3

Maintaining and Supporting Sawyer

Powering Down Sawyer Properly

1. Clear the area around the robot.

2. If performing maintenance, grab the training cuff or turn the knob to cause the

head to move to the side. If the robot does not have power, carefully move the
head manually.

3. Press the white power button on the robot pedestal.

The shutdown process is complete when all lights and the LCD screen have
completely powered down.

Unplug the power cord from the wall outlet/power source. Make sure there is no sound coming from
the control box before removing power.

Maintaining Sawyer

Dust filters installed in the controller air inlet and fan exhaust ports require periodic inspection to
ensure proper ventilation of the controller.

Cleaning Sawyer

To clean Sawyer, you may periodically wipe it down with a clean, damp cloth. Do not use abrasives
or solvents.

Check the fan filter in the controller box periodically and clean if necessary.

On behalf of the entire team at Rethink Robotics, we wish you great success with your Sawyer
robot, and hope you find it to be a valuable solution for your business.

Содержание Sawyer





























































































































































































































Результаты поиска

Содержание Sawyer

Отзывы:

Rethink Robotics Sawyer, Оригинальное руководство пользователя, Страница: 149 / 220

Результаты поиска

Содержание Sawyer

Отзывы: