Rethink Robotics Sawyer Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 220

Rethink Robotics Sawyer Скачать руководство пользователя страница 29

22

Intera 5.3

Getting Started with Sawyer

Getting Started with Sawyer

Setting Up Sawyer

For the latest and most detailed information on Sawyer and Intera 5, we always recommend you
see the Online User Guide at:

mfg.rethinkrobotics.com/intera.

The Rethink Robotics support page

is here:

Rethink Support.

Ensure that you have reviewed safety guidance provided in this document prior to

installing and operating the robot.

To set up Sawyer:

•

Locate the installation card that ships with the robot. Follow the instructions to
assemble the pedestal (if ordered), and attach Sawyer to the pedestal or
alternate work surface.

•

Follow the instructions included with the gripper kit to install a gripper.

Power

Sawyer ships with a detachable power cable with an integrated ground terminal. Sawyer’s power
cable must be connected to an earthed mains outlet that is installed near the equipment and that is
easily accessible during operation of the robot. Use only Rethink supplied power cables. Sawyer
may be connected to 100VAC - 240VAC single phase mains supplies.

Disconnecting power

Under normal conditions, Sawyer may be powered down by selecting the Power option using the
navigator controls.

«
...
27
28
29
30
31
...
»

Содержание Sawyer





























































































































































































































Отзывы:

Нет отзывов