resto italia RTF, Инструкция по эксплуатации

Страница: 14 / 32

English
SPIRAL MIXER SK - RTF - RTS
3
0.0 14
400 mm 400 mm
1000 mm
400 mm
3.9. MACHINE STABILITY
The stability of the machine has been designed to allow its use without a risk of tilting, if used correctly. Considering its shape and
position, the machine is stable and does not need to be fixed on the floor.
3.10. POSITIONING THE MACHINE
Make sure that the supporting surface is suitable to withstand the loads indicated in table (2. TECHNICAL DATA)
Position the machine complying with the instructions indicated in (Fig. 6), as they indicate
the minimum distance required for the operator or technician to perform
the work/maintenance sequence correctly.
3.11. POWER SUPPLY
The electrical connection must be made in compliance with the national standards
USER’S ELECTRICAL SYSTEM
The user’s system upstream the machine control equipment must be designed
and installed in compliance with the safety rules concerning “user’s low voltage systems” (IEC3644 / HD384 / CEI 64-8 - latest edi-
tions).
In relation to the energy distribution system, which powers the machine control equipment, the machine must belong to one of the
normalised TT or TN systems, in compliance with IEC364_4_41 / HD382_4_41 / CEI 64.8 (4_41) (latest editions).
According to the above provisions/indications, the relative earthing system must fully comply with
the applicable requirements for the coordination with the associated active devices, in compliance with IEC364-5-54 / HD382-5-54 /
CEI 64.8 (5-54) (latest editions).
PROTECTION DEVICE AGAINST OVERCURRENT
The equipment is designed to withstand a symmetrical short circuit of short duration, which does not exceed 6kA. If the rated con -
ditional prospective short-circuit current in the installation point is greater than the value indicated, it must be suitably limited.
Since the electrical equipment used to control the machine is not fitted with d. c. electronic circuits, we recommend taking action
to guarantee protection against indirect contact. In order to protect against automatic power supply interruption be equipped with
SUITABLE DIFFERENTIAL DEVICES
( FIG. 6 )