resto italia RTF, Инструкция по эксплуатации

Страница: 11 / 32

English
SPIRAL MIXER SK - RTF - RTS
3
0.0 11
INSTALLATION
3
3.1. TRANSPORT AND HANDLING
The machine can be transported in a container or via couriers. The same type of packaging is required for both cases. (See dimensions
and weight table)
The machine packaging must be protected against atmospheric agents. It is strictly prohibited to place other cra-
tes or various materials on it. Handle the box with care. The box must be handled and transported by means of forkli-
ft trucks or pallet trucks, making sure that the attachments of the lifting means are positioned as shown in figure (FIG.1)
Keep the load at the minimum height from the ground during handling operations in order to improve the stability of the load
Lifting and handling operations must be performed by specialist and authorised personnel.
The manufacturer declines any liability for damage to persons or objects resulting from failure to comply with the safety standards in
force relative to lifting and moving materials inside and outside the plant.
3.2. STORAGE
The machine crate must be stored in an environment protected from atmospheric agents. It is strictly prohibited to place other
crates or various materials on it.
3.3. CHECKS UPON RECEIPT
Upon receiving the material, it is important to check:
1. crate number
2. weight and dimensions
3. correspondence between that indicated on the transport document and the material received
4. state and integrity of the packaging
5. that the packaging has not suffered damage during transport.
If everything is intact, remove the packaging as specified in section (see pos. 3.3 /chap 3)
Any damage , faults , and non-conformities must be promptly communicated
within 8 days from the date of receiving the machine. Otherwise, the goods will be considered as accepted
On this point, the manufacturer reminds the user that, according to national and international standards,
the goods travel at the buyer’s own risk.
Lifting points
( FIG.1 )