resto italia RTF, Инструкция по эксплуатации

Страница: 8 / 32

English
SPIRAL MIXER SK - RTF - RTS
2
0.0 8
2.6. SET-UP RESPONSIBILITIES OF THE CUSTOMER
A) Setting up the installation site.
• The customer must set up a support surface for the machine as indicated in the use condition table.
B) Setting up the electrical system.
• The electric system must comply with the standards in force and must be provided with an efficient earthing system.
• Place an omnipolar disconnecting device on the power supply line, upstream of the machine.
• The power cables must be sized according to the maximum current required by the machine so that the total voltage drop,
at full load, is less than 2%.
2.7. TECHNICAL DATA
2.5. USE CONDITIONS
DATA SK - 10 / 20 / 30 / 40 / 50 / ** Serie TR / MO / 2V
TRF - 20 / 30 / 40 / 50 / ** Serie TR / MO / 2V
RTS - 20 / 30 / 40 / 50 / ** Serie TR / MO / 2V
Equivalent continuous A-weighted sound
power level
Lower than 70 Dba
Current nature - Frequency Cfr. machine identification plate
Current value Cfr. machine identification plate
Rated voltage Cfr. machine identification plate
Rated conditional prospective short-cir -
cuit current
6 kA Symmetrical
Earth and neutral TT e TN
Protection rating IP 21
Machine position Work bench used in the food industry, with height ranging between 900 and 1000
mm from the floor, in which it is possible to move around the machine with a free
space of at least 800 mm
Place of use Indoors
Maximum room temperature + 40° Degrees
Minimum work environment lighting 500 lux
Additional use condition "Machine NOT SUITABLE to run in environments containing contaminants, e.g. dust,
corrosive gas, etc.
Machine NOT SUITABLE to run in environments with a potentially explosive atmo -
sphere.
Machine NOT SUITABLE to run in environments with ionizing radiation, such as micro -
waves, ultraviolet rays, laser and similar.
Electric equipment NOT SUITABLE to run in environments in which there are vibra-
tions and the risk of impacts. Install anti-vibration mounts if necessary"
Overcurrent protective device recommed
Rated insulation voltage Ui = > 690 V
Rated current see TECHNICAL DATA table
Thermal relay adjustment see TECHNICAL DATA table
Maximum value of the fault loop impedance 0.1
Max operating temperature + 40 C Degrees
Relative humidity
10 ÷ 80 %