PART III IMPORTANT PARTS - ELECTRONIC CELL
1. DO NOT clean the cell with
alcohol, gasoline, paint thinner
or other flammable substances. It may cause fire!
2. DO NOT reinstall the cell until it is completely dry. If the
CHECK light on the control panel flashes red, then the cell
may still be wet.
3. Be sure there is no detergent residue around the cell
ceramic insulators, especially around the square shape
ceramic insulators.
4. Slide in the cell so the airflow arrow points toward the machine.
WARNING
Specifications of electronic cell
Part model
Dimmensions
Weight
Collecting surface area
Particl removal efficiency
Power consumption
200-5p
39.4cmx42cmx11cm
3.8kg
1.95m
2
95%-98%< 0.3microns~0.5microns
The square ceramic
insulator was burnt and
cracked down because of a
long time use of the wet cell.
Discoloration of the cell
Occasionally, after the cleaning process, the cell may seem stained. If the stain is black or very dark, it is probably
detergent residue and should be rinsed off at once. If yellowing appears, it is probably stain from tobacco or other smoke.
The yellowing does not affect air cleaning efficiency. Use ammonia based or butyl based detergent to clean tobacco tar
and other smoke residue from the collector plates.
ENGLISH
E-13
