Interface Specification Document
6.3.1.47 Time
•
DESCRIPTION:
This message sets the processor time (not used for time stamping any data).
•
SYNTAX:
*TIME,HH,MM,SS<CR><LF>
•
PARAMETERS:
HH – Hour, 0 – 23.
MM – Minute, 0 – 59.
SS – Second, 0 – 59.
•
EXAMPLE:
*TIME,13,42,1<CR><LF>
The example sets the Processor time to 13:42:01.
6.3.1.48 UTC-Time Baud Rate
•
DESCRIPTION:
This message controls the IN baud rate for serial port 1. The port IN receives UTC-time
data.
•
SYNTAX:
*TMBR,N<CR><LF>
•
PARAMETERS:
N – Baud rate. Different speeds are 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200.
•
EXAMPLE:
*TMBR,19200<CR><LF>
This message sets the In baud rate on serial port 1 to 19200.
6.3.1.49 Test
Pattern
•
DESCRIPTION:
This message tells the 81-P processor to output a test pattern. The test pattern repre-
sents a flat seafloor and a bump moving from beam to beam.
•
SYNTAX:
*TPAT,N<CR><LF>
•
PARAMETERS:
N – Test pattern value. 1 Turns the test pattern ON, any other value turns it OFF.
•
EXAMPLE:
*TPAT,1<CR><LF>
The message sets the test pattern ON.
6.3.1.50 Uplink
•
DESCRIPTION:
This message selects the uplink port.
•
SYNTAX:
*UPLK,N<CR><LF>
•
PARAMETERS:
N – Uplink port.
0 – COAX 1.
1 – COAX 2.
2 – FIBER 1.
3 – FIBER 2.
•
EXAMPLE:
*UPLK,1<CR><LF>
The example tells the processor to receive uplink on port coax 2.
______________________________________________________________________
SeaBat 8101 Operator's Manual
6-20
(ISD Rev 1.23) Version 3.02
