Interface Specification Document
6.3.1.27 Network
•
DESCRIPTION:
This message sets the different network addresses used and the UDP Port.
•
SYNTAX:
*NADR,N,PARAM<CR><LF>
•
PARAMETERS:
N – Type of address to set.
0 – Local IP address (processor box).
1 – Remote IP address (data collection system).
2 – UDP port.
3 – Gateway IP address (router).
4 – Subnet mask.
PARAM – The Param is dependent of the Type.
Type 0 – IP address (XXX.XXX.XXX.XXX)
Type 1 – IP address (XXX.XXX.XXX.XXX)
Type 2 – UDP port (XXXXX)
Type 3 – IP address (XXX.XXX.XXX.XXX)
Type 4 – Subnet mask (XXX.XXX.XXX.XXX)
•
EXAMPLE:
*NADR,1,10.0.1.245<CR><LF>
This example sets the 81-P processor IP address to 10.0.1.245.
6.3.1.28 Power
•
DESCRIPTION:
This message sets the sonar transmitter power.
•
SYNTAX:
*POWR,N<CR><LF>
•
PARAMETERS:
N – The power value.
•
EXAMPLE:
*POWR,0<CR><LF>
This message sets the power to OFF.
______________________________________________________________________
SeaBat 8101 Operator's Manual
6-14
(ISD Rev 1.23) Version 3.02
