Interface Specification Document
6.3.1.32 Pulse
Width
•
DESCRIPTION:
This message sets the pulse width in seconds.
•
SYNTAX:
*PWID,N
<CR><LF>
•
PARAMETERS:
N – Pulse width value in seconds.
•
EXAMPLE:
*PWID,0.0017<CR><LF>
Sets transmit pulse-width to 0.0017 seconds.
6.3.1.33 Range
•
DESCRIPTION:
This message changes the range setting.
•
SYNTAX:
*RANG,N
<CR><LF>
•
PARAMETERS:
N – Range value..
•
EXAMPLE:
*RANG,5<CR><LF>
This example sets the range setting to 5 m.
6.3.1.34 Raw Output Beam Selection (raw output only)
•
DESCRIPTION:
This message sets the first exported beam.
•
SYNTAX:
*RAWB,N<CR><LF>
•
PARAMETERS:
N – First exported beam (0 to maximum number of beams – 1)
•
EXAMPLE:
*RAWB,0<CR><LF>
This message sets the first exported beam to be 0 (first beam).
6.3.1.35 Raw Output Mode Selection (raw output only)
•
DESCRIPTION:
This message sets the raw output mode.
•
SYNTAX:
*RAWM,N<CR><LF>
•
PARAMETERS:
N – Mode
0 – No data exported.
1 – 16 bits magnitude, 20 beams exported.
2 – 16 bits magnitude and 16 bits phase, 10 beam exported.
3 – 8 bits magnitude, 40 beams exported.
•
EXAMPLE:
*RAWM,1<CR><LF>
This message sets the raw output mode to 1 where 16 bit magnitude data (20 beams)
are being exported.
______________________________________________________________________
SeaBat 8101 Operator's Manual
6-16
(ISD Rev 1.23) Version 3.02
