REPLIGEN XCell Lab XC-LAB-D Скачать руководство пользователя страница 55

Страница: 55 / 69

XCell™ Lab Controller

User Guide

55 repligen.com XC-LAB-UG-V4

Category

Description

Part Number

Controller, Compact Logix 5370 L1

SV-SPR-RM-12470

Fuses, Fast Acting, 125V, 4A

SV-SPR-RM-12474

Modbus RTU Comm Module

SV-SPR-RM-12498

Fuses, Fast Acting, 250V, 3A, 5 x 20mm

SV-SPR-RM-12500

Adaptor, Elbow, M12xRJ45, Female

SV-SPR-RM-12551

Cable, 0.3m RJ45xRJ45 Male

SV-SPR-RM-12552

12.

Appendix B IT, IP Addresses and External Communication

Either ethernet port on the controller can be used to connect to the supplied tablet/HMI which runs

Repligen’s XCell™ Lab Software. It should not be transferred to another Surface Pro or any other

computer device.

The two ethernet ports are switched internally and hence equivalent. Future software updates will

use the second port for advanced functionality. The Surface Pro tablet comes with Wi-Fi capability

built in but is not used by the XCell™ Lab software.

Connection to a corporate network, a remote DCS, supervisory monitoring and control system or

domain management of tablet or mapped drives, is not recommended or supported.

Note:

At shipping, the controller and Surface Pro are issued with the IP addresses: 192.168.1.101 and

192.168.1.167, respectively. The HMI is configured to look for these addresses on the process

control network.

Precaution: Please ensure that the ethernet cables are connected properly. If not, the

XCell™ lab will trigger an alarm.

12.1

Changing IP address on the HMI

If you find an error in communication between the tablet and the controller, you may need to edit

the IP address of the tablet. Please see instructions below, which should only be carried out by a

qualified IT or automation engineer or an authorized Repligen engineer.

Open Control Panel (press Windows Start, then press the Gear Icon).

Click on Network and Internet.

Click on Ethernet.

On the right pane, click on Change adapter options.

Содержание XCell Lab XC-LAB-D






































































Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды

REPLIGEN XCell Lab XC-LAB-D, Руководство пользователя

Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды