REPLIGEN XCell Lab XC-LAB-D Скачать руководство пользователя страница 2

Страница: 2 / 69

KrosFlo® TFDF™ Lab System

User Guide

XCell™ Lab Controller

User Guide

2 XC-LAB-UG-V4

The information contained in this document is subject to change without notice.

With respect to documentation accompanying Product, Repligen makes no warranty, express or

implied. Any and all warranties related to the documentation accompanying Product are expressly

disclaimed. Customer shall refer to the terms and conditions of sale governing the transaction for

any and all warranties for the Product.

Repligen Corporation shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language

without the prior written consent of Repligen Corporation.

Products are not intended for diagnostic or therapeutic use or in vivo with humans or animals.

For further information, please contact Repligen Corporation at

www.repligen.com

of Repligen Corporation and/or its affiliate(s) or their respective owners.

Customer Support

[email protected]

+1-800-622-2259 (Option 1)

Repligen Corporation

41 Seyon Street

Building 1 Suite 100

Waltham, Massachusetts 02453

www.repligen.com

Содержание XCell Lab XC-LAB-D






































































Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды

REPLIGEN XCell Lab XC-LAB-D, Руководство пользователя

Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды