REPLIGEN XCell Lab XC-LAB-D Скачать руководство пользователя страница 16

Страница: 16 / 69

XCell™ Lab Controller

User Guide

16 repligen.com XC-LAB-UG-V4

A dedicated tablet running the XCell™ Lab software operates each controller

•

Each controller supports up to 2 XCell ATF® Devices, depending on the model purchased

•

The XCell™ Lab Controller will run XCell ATF® 1, 2 and 4 Devices, with adjustment of A2C

tubing, A2B tubing and flow sensor

•

Two XCell ATF® Devices from a single controller may be connected to two bioreactors.

Alternatively, two XCell ATF® Devices from a single controller may be connected to a single

bioreactor for an increased rate of media exchange.

6.5

XCell™ Lab Controller

XCell™ Lab Controller is available in 3 different models (

Table 4

). Controller model number XC-LAB-

D-P utilizes a permeate pressure sensor to gain insight into real-time filter performance and fouling

characteristics. This data helps determine when a filter should be replaced and improves scale-up

prediction.

Table 4. XCell™ Lab Controller model comparison

Features

XC-LAB-S

XC-LAB-D

XC-LAB-D-P

Single ATF Operation



Dual ATF Operation



In/Out of Phase or Independent Dual Operation

N/A



Transmembrane Pressure (P3)



Single Use XCell ATF® 1



Single Use XCell ATF® 2



Autoclavable XCell ATF® 2



Autoclavable XCell ATF® 4



If monitoring filter fouling and permeate pressure is important to your process, then you should

consider purchasing the D-P model as this feature is not available on the S and D models. If you

purchase an S model, you will not be able to upgrade your controller to a D model.The controller is

United States, United Kingdom, European Union and China are included with your shipment.

Locations that utilize an adaptor outside this set of four will require a customer provided adaptor.

The controller has two faces with utility ports and controls. Face A of the controller governs utility

inputs, including the vacuum, air and electric power to the enclosure (

Figure 5

). Face A also includes

the power switch for the controller. Note that some ports on Face A may not be used in the current

model.

Note:

The utility tubing set provided connects to the air and vacuum ports (

Figure 5

). The air tubing

connects the controller to the SAPA, not directly to your lab utility source.

Face B of the controller (

Figure 6

) governs output operations, including connection to the XCell ATF®

Device and relevant sensors.

Содержание XCell Lab XC-LAB-D






































































Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды

REPLIGEN XCell Lab XC-LAB-D, Руководство пользователя

Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды