REPLIGEN XCell Lab XC-LAB-D Скачать руководство пользователя страница 50

Страница: 50 / 69

XCell™ Lab Controller

User Guide

50 repligen.com XC-LAB-UG-V4

Flow control is random for the first minute or so of operation

Startup includes this expected behavior. When the controller first starts, it performs an initialization

routine that has periods of no flow and periods of irregular flow, in order to determine optimum

settings for your configuration.

10.

Maintenance and service

The XCell™ Lab System design is robust and intended for use with other process and lab equipment.

The frame, cabinet, and sensors can be cleaned by wiping down surfaces with mild cleaning agents

and/or warm water, a damp cloth or lab wipes. The display should be cleaned with computer screen

cleaner and computer screen wipes.

All repairs of the system must be performed by a qualified Repligen service engineer. Opening of

the system and attempted repair by the user or third party shall void the product warranty.

An annual preventative maintenance is strongly advised to ensure equipment stays in prime

condition and that performance is not affected. Failure to do so could lead to detrimental cell

culture results.

10.1

Ongoing service and support

Repligen provides a range of service and support options to ensure your system is reliable and

performs optimally.

•

Preventative Maintenance (PM)

•

Comprehensive Service Contracts

•

Technical Support

•

User Training

•

Applications Support

A PM or service visit by our engineer would include verification and adjustment of the following key

components as necessary:

PCV valves:

These are finely tuned pneumatic valves that must be kept clean and calibrated for

proper operation.

P2 sensor:

This is linked to the PCV valves and any drift or noise will cause performance problems

and must be rectified.

Controller filter:

This should not be removed or replaced when vacuum is running, even in a clean

room. An annual change is recommended for typical use.

For more information on spare parts, service and support, please visit our website

www.repligen.co

m or email:

[email protected]

Содержание XCell Lab XC-LAB-D






































































Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды

REPLIGEN XCell Lab XC-LAB-D, Руководство пользователя

Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды