REPLIGEN XCell Lab XC-LAB-D Скачать руководство пользователя страница 18

Страница: 18 / 69

XCell™ Lab Controller

User Guide

18 repligen.com XC-LAB-UG-V4

Table 5. Controller ports

Item

Description

Air

Positive air pressure from SAPA

Vacuum

Vacuum line from facility line or vacuum pump manifold

Multi-pumps

NOT CURRENTLY USED

Permeate A pump

NOT CURRENTLY USED

Permeate B pump

NOT CURRENTLY USED

AUX Pumps

NOT CURRENTLY USED

Power switch

Power on/off

24V DC in

DC power from power supply

24V DC out

NOT CURRENTLY USED

10 ATF A / B System pause

Pause buttons for ATF A and ATF B

LED light to indicate status

11 Alarm

Visual alarm (audio optional)

12 To ATF A / B

A2C connections for air pressure and vacuum to ATF

filtration devices

13 Bioreactor A / B Weight

NOT CURRENTLY USED

14 ATF A / B Flow Sensor

A2B retentate line flow sensor connections from filtration

devices

15 Ethernet

1: Communication between controller and tablet (M12 via

ethernet to RJ45 USB adapter on tablet)

NOT CURRENTLY USED

16 ATF A / B Permeate pressure

Permeate line P3 pressure sensor inlet connections

17 VCD – Bioreactor A / B

NOT CURRENTLY USED

Two manual pause buttons (item 10) allow each device to be independently paused. The alarm (11)

alerts the user when attention is required. The A2C lines (12) provide positive and negative air

pressure to the XCell ATF® Device. Pressure (16) and flow (14) sensor ports carry data from the

device-mounted sensor to the controller. An ethernet port (15) transfers data to a tablet for

viewing, processing, and analysis. Like Face A, some ports of Face B are not used in the current

model.

The software interface is accessed through a Surface Pro tablet, provided in a protective case. The

tablet may be mounted directly on the controller or to a shelf, using a bracket and moveable support

arm. Each controller requires a dedicated tablet that uses a wired ethernet connection to the

controller port.

6.5.1

A2B and A2C tubing sets

Each XCell ATF® Device requires a specific A2B and A2C tubing set size. The controller ships with a

collection of A2C tubing sets suitable for all devices (ATF1, ATF2 and ATF4). The A2C tubing may

appear to be similar – but they are not – and each is designed to function with a specific XCell ATF®

device size. Labeling on the tube sets indicates use with an ATF1, ATF2 or ATF4 device. The A2C

tubing set connects the XCell ATF® Device to the controller.

A flow sensor on the A2B line, engineered specifically for XCell ATF® applications, requires a specific

tubing OD and tubing type. Tube sets with a permeate pressure sensor also are available. Both the

flow sensor and the pressure sensor connect directly to the controller. The device specific setup-

guides describe tube set specifications in detail; a brief summary is provided in the table below.

Содержание XCell Lab XC-LAB-D






































































Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды

REPLIGEN XCell Lab XC-LAB-D, Руководство пользователя

Результаты поиска

Содержание XCell Lab XC-LAB-D

Отзывы:

Бренды по названию

Популярные бренды