Reno MMU-1600G Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 58

background image

Model MMU-1600G Series Op Man - Ver 1.07.23 - Rev 20151026DL

Page 54 of 58

4.9.3.1 Permissive Displays

The left display is the ID Display (P1).

The right display is the Data Display. On the Data Display:

FLASHING - The channel with the flashing

R

,

Y

, and

G

is the channel whose permissives are

being displayed.
SOLID - Channels that are permissive with the flashing channel according to the jumpers on
the Programming Card.

In the example shown, the Permissives for Channel 1 are being viewed and the Permissives are
Channel 7, Channel 8, and Channel 9.

4.9.4 Configuration Display 2

The left display is the ID Display (C2).

The right display is the Data Display. On the Data Display:

R

- Shows the active Flashing Don’t Walk Monitoring channels.

Y

- Shows the active Features.

1 = Type 16 Only feature.
2 = Flashing Don’t Walk Monitoring feature.
3 = External Watchdog feature.
4 = Green / Yellow Monitoring feature.
5 = Modified CVM Latch feature.
6 = Disable Local Flash feature.
7 = Per Channel Red Enable / Co-Channel feature.
8 = 24V-2 To 12VDC feature.
9 through 14 are reserved for future features.
15 = Flashing Yellow Arrow Monitoring feature.
16 = LED Thresholds feature.

G

- Shows User Options and Factory Setup Options.

1 = User Option Log Field Changes.
2 = User Option Log Local Flash Events.
3 = User Option Log CVM Events.
4 = User Option Flashing Yellow Arrow Ignore Yellow Conflict.
5 = User Option Co-Channel Childs Include Yellow or Flashing Yellow Arrow Driver is
Yellow.
6 = User Option Programming Card Memory Usage.
7 = User Option Disable Buzzer.
8 = User Option Daylight Saving Time.
9 = Factory Setup Option Flashing Greens.
10 = Factory Setup Option Econolite Frames.
11 through 15 are reserved for future features.
16 = Factory Setup Option Diagnostic LCD Display.

In the example shown, Channels 3, 6, 9, and 12 are programmed for Flashing Don’t Walk
Monitoring but the feature is not enabled; Type 16 Only mode is enabled; the Per Channel Red
Enable / Co-Channel feature is enabled; the 24V-2 To 12VDC feature is enabled; and Flashing
Yellow Arrow Monitoring is enabled.

«
...
52
53
54
55
56
...
»

Содержание MMU-1600G Series



























































Отзывы:

Нет отзывов

Похожие инструкции для MMU-1600G Series

Бренд: IBM Страницы: 54

Бренд: US Robotics Страницы: 36

Virtual Services Platform 7000 Series

Бренд: Avaya Страницы: 103

Бренд: Valcom Страницы: 4

AMX Vision2 V2-MASTER-1210

Бренд: Harman Страницы: 2

SuperServer 1026T-M3

Бренд: Supero Страницы: 104

Бренд: 360 Systems Страницы: 148

Бренд: IBM Страницы: 220

Бренд: Olive Страницы: 103

Бренд: FS Страницы: 91

Бренд: Brocade Communications Systems Страницы: 176

xSeries 440 8687

Бренд: IBM Страницы: 80

xSeries 230 6RY

Бренд: IBM Страницы: 194

Бренд: Dell Страницы: 77

Бренд: Dell Страницы: 14

Бренд: Dell Страницы: 116

PowerEdge FC430

Бренд: Dell Страницы: 102

Бренд: Dell Страницы: 188

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды