manualshive.com logo in svg

Renesas SH7781, Руководство по оборудованию

Renesas SH7781 является высокопроизводительным процессором, предназначенным для широкого спектра приложений. На нашем сайте вы можете бесплатно скачать Руководство по аппаратному обеспечению для этого устройства. Получите всю необходимую информацию для работы с Renesas SH7781 на manualshive.com.

Поделиться
Скачать
background image

Rev.1.00  Jan. 10, 2008  Page ii of xxx 
REJ09B0261-0100 

 

1.   This document is provided for reference purposes only so that Renesas customers may select the appropriate  
      Renesas products for their use. Renesas neither makes warranties or representations with respect to the  
      accuracy or completeness of the information contained in this document nor 

g

rants any license to any 

      intellectual property ri

g

hts or any other ri

g

hts of Renesas or any third party with respect to the information in 

      this document. 
2.   Renesas shall have no liability  for dama

g

es or infrin

g

ement of any intellectual property or other ri

g

hts arisin

g

 

      out of the use of any information in this document, includin

g

, but not limited to, product data, dia

g

rams, charts, 

      pro

g

rams, al

g

orithms, and application circuit examples.

3.   You should not use the products or the technolo

g

y described in this document for the purpose of military  

      applications such as the development of weapons of mass destruction or for the purpose of any other military 
      use. When exportin

g

 the products or technolo

g

y described herein, you should follow the applicable export 

      control laws and re

g

ulations, and procedures required by such laws and re

g

ulations.

4.   All information included in this document such as product data, dia

g

rams, charts, pro

g

rams, al

g

orithms, and 

      application circuit examples, is current as of the date this document is issued. Such information, however,  is 
      subject to chan

g

e without any prior notice. Before purchasin

g

 or usin

g

 any Renesas products listed in this 

      document, please confirm the latest product information  with a Renesas sales office. Also, please pay re

g

ular 

      and careful attention to additional and different information to be disclosed by Renesas such as that disclosed 
      throu

g

h our website. (http://www.renesas.com )

5.   Renesas has used reasonable care in compilin

g

 the information included in this document, but Renesas 

      assumes no liability whatsoever for any dama

g

es incurred as a result of errors or omissions in the information 

      included in this document.
6.   When usin

g

 or otherwise relyin

g

 on the information in this document, you should evaluate the information in 

      li

g

ht of the total system before decidin

g

 about the applicability of such information to the intended application.  

      Renesas makes no representations, warranties or 

g

uaranties re

g

ardin

g

 the suitability of its products for any 

      particular application and specifically disclaims any liability arisin

g

 out of the application and use of the 

      information in this document or Renesas products.  
7.   With the exception of products specified by Renesas as suitable for automobile applications, Renesas 
      products are not desi

g

ned, manufactured or tested for applications or otherwise in systems the failure or 

      malfunction of which may cause a direct threat to human life or create a risk of human injury or which require 
      especially hi

g

h quality and reliability such as safety systems, or equipment or systems for transportation and 

      traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication 
      transmission. If you are considerin

g

 the use of our products for such purposes, please contact a Renesas 

      sales office beforehand. Renesas shall have no liability for dama

g

es arisin

g

 out of the uses set forth above.

8.   Notwithstandin

g

 the precedin

g

 para

g

raph, you should not use Renesas products for the purposes listed below:

        (1) artificial life support devices or systems
        (2) sur

g

ical implantations

        (3) healthcare intervention (e.

g

., excision, administration of medication, etc.)

        (4) any other purposes that pose a direct threat to human life
      Renesas shall have no liability for dama

g

es arisin

g

 out of the uses set forth in the above and purchasers who  

      elect to use Renesas products in any of the fore

g

oin

g

 applications shall indemnify and hold harmless Renesas 

      Technolo

g

y Corp., its affiliated companies and their officers, directors, and employees a

g

ainst any and all 

      dama

g

es arisin

g

 out of such applications. 

9.   You should use the products described herein within the ran

g

e specified by Renesas, especially with respect 

      to the maximum ratin

g

, operatin

g

 supply volta

g

e ran

g

e, movement power volta

g

e ran

g

e, heat radiation 

      characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or 
      dama

g

es arisin

g

 out of the use of Renesas products beyond such specified ran

g

es.

10. Althou

g

h Renesas endeavors to improve the quality and reliability of its products, IC products have specific 

      characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use 
      conditions. Please be sure to implement safety measures to 

g

uard a

g

ainst the possibility of physical injury, and 

      injury or dama

g

e caused by fire in the event of the failure of a Renesas product, such as safety desi

g

n for 

      hardware and software includin

g

 but not limited to redundancy, fire control and malfunction prevention, 

      appropriate treatment for a

g

in

g

 de

g

radation or any other applicable measures.  Amon

g

 others, since the 

      evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or  
      system manufactured by you.  
11. In case Renesas products listed in this document are detached from the products to which the Renesas 
      products are attached or affixed, the risk of accident such as swallowin

g

 by infants and small children is very 

      hi

g

h. You should implement safety measures so that Renesas products may not be easily detached from your 

      products. Renesas shall have no liability for dama

g

es arisin

g

 out of such detachment.

12. This document may not be reproduced or duplicated, in any form, in  whole or in part, without prior written 
      approval from Renesas. 
13. Please contact a Renesas sales office if you have any questions re

g

ardin

g

 the information contained in this  

      document, Renesas semiconductor products, or if you have any other inquiries.

Notes re

g

ardin

g

 these materials

 

Содержание SH7781





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SH7781

CAME QBEMFSB2 User Manual preview
QBEMFSB2
Бренд: CAME Страницы: 19
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Бренд: Paradyne Страницы: 112
Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Бренд: Alacritech Страницы: 20
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Бренд: Orban Страницы: 255
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Бренд: Internet Security Systems Страницы: 42
Seattle Computer Products 8086 CPU Instruction Manual preview
8086 CPU
Бренд: Seattle Computer Products Страницы: 31
NEC Thin Client US310e Getting Started preview
Thin Client US310e
Бренд: NEC Страницы: 6
Paradyne Fan Tray 8820-S2-900 Installation Instructions Manual preview
Fan Tray 8820-S2-900
Бренд: Paradyne Страницы: 6
Xmart SNMP06 Reference Manual preview
SNMP06
Бренд: Xmart Страницы: 8
AXIOMTEK CEM500 Quick Installation Manual preview
CEM500
Бренд: AXIOMTEK Страницы: 2
Konica Minolta SRX-101A Operation Manual preview
SRX-101A
Бренд: Konica Minolta Страницы: 31
Buffalo LinkStation 500 User Manual preview
LinkStation 500
Бренд: Buffalo Страницы: 139
Corsair ELITE LCD UPGRADE KIT Manual preview
ELITE LCD UPGRADE KIT
Бренд: Corsair Страницы: 11
YASKAWA 040-1CA00 Manual preview
040-1CA00
Бренд: YASKAWA Страницы: 87
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Бренд: Paradyne Страницы: 28
IBASE Technology SI-22-415 User Manual preview
SI-22-415
Бренд: IBASE Technology Страницы: 49
Matrix Switch Corporation MSC-CP32X1E Product Manual preview
MSC-CP32X1E
Бренд: Matrix Switch Corporation Страницы: 48
Fibocom H330SS Hardware User Manual preview
H330SS
Бренд: Fibocom Страницы: 39

Бренды по названию

Популярные бренды

Загрузить еще бренды