Renault ALASKAN 2020, Руководство пользователя транспортного средства

Страница: 88 / 334

CAUTION
Do not place any objects on top of the brightness
sensor. The sensor senses the brightness level
and controls the autolight function. If the sensor
is covered, it reacts as if it is dark, and the head-
lights will illuminate.
m position
The position turns on the front clearance, in-
strument panel, tail and number plate lights.
m position
The position turns on the headlights in addi-
tion to the other lights.
Headlight beam
To turn on the high beam, push the lever towards
the front position
➀
.
To turn off the high beam, return the lever to the
neutral position
➁
.
To flash the headlights, pull the lever towards the
rearmost position
➂
. The headlights can be flashed
even when the headlights are not on.
Friendly lighting (where fitted):
When the lever is pulled towards the rearmost posi-
tion
➂
after the ignition switch is placed in the OFF
or LOCK position, the headlights will turn on and
stay on for 30 seconds. Each time the lever is pulled
towards the rearmost position 30 seconds are
added to the timer.
The lever can be pulled up to 4 times for 2 minutes
of illumination.
Daytime running light system
(where fitted)
Even if the headlight switch is in the OFF position,
the daytime running lights will come on after start-
ing the engine.
When the light switch is turned to the or
position, the daytime running light will turn off.
HEADLIGHT AIMING CONTROL
(where fitted)
Manual type
The headlight aiming control operates when the ig-
nition switch is in the
ON and the headlight switch
is in the position to allow the headlight axis to
be adjusted according to the driving condition.
When driving with no heavy load/luggage or driving
on a flat road, select the normal position <0>.
If the number of occupants and load/luggage in the
vehicle changes, the headlight axis may become
higher than normal.
If the vehicle is travelling on a hilly road, the head-
lights may directly shine on the rearview and out-
side mirrors of a vehicle ahead or the windscreen of
an oncoming vehicle, which may obscure another
drivers' vision.
To adjust to the proper aiming height, turn the
switch accordingly. The higher the number, desig-
nated on the switch, the lower the headlight axis.
NIC2914
JVI0477XZ
80
Instruments and controls