Renault ALASKAN 2020, Руководство пользователя транспортного средства

Страница: 32 / 334

2. Slowly pull the seat belt out of the retractor and
insert the tongue into the buckle until you hear
and feel the latch engage.
•
The retractor is designed to lock during a
sudden stop or on impact. A slow pulling
motion permits the seat belt to move, and
allows you some freedom of movement in
the seat.
•
If the seat belt cannot be pulled from its fully
retracted position, firmly pull the belt and
release it. Then smoothly pull the belt out of
the retractor.
3. Position the lap belt portion low and snug on the
hips as shown.
4. Pull the shoulder belt portion toward the retrac-
tor to take up extra slack. Be sure the shoulder
belt is routed over your shoulder and is snug
across your chest.
Shoulder belt height adjustment (for
front seats)
WARNING
•
The shoulder belt anchor height should be ad-
justed to the position best for you. Failure to
do so may reduce the effectiveness of the en-
tire restraint system and increase the chance
or severity of injury in an accident.
•
The shoulder belt should rest on the middle of
the shoulder. It must not rest against the neck.
•
Be sure that the seat belt is not twisted in any
way.
•
Be sure that the shoulder belt anchor is se-
cured by trying to move the shoulder belt an-
chor up and down after adjustment.
To adjust, pull on the release button
➀
and move
the shoulder belt anchor to the proper position
➁
,
so that the belt passes over the centre of the shoul-
der. The belt should be away from your face and
neck, but not falling off your shoulder. Release the
button to lock the shoulder belt anchor into posi-
tion.
Unfastening seat belts
Push the button on the buckle. The seat belt auto-
matically retracts.
Checking seat belt operation
Seat belt retractors are designed to lock seat belt
movement:
•
When the seat belt is pulled quickly from the re-
tractor.
•
When the vehicle slows down rapidly.
To increase your confidence in the seat belts, check
the operation by grasping the shoulder belt and
pulling forward quickly. The retractor should lock
and restrict further belt movement. If the retractor
does not lock during this check, contact an ap-
proved dealer or qualified workshop immediately.
SSS0467Z
SSS0351AZ
24
Safety — seats, seat belts and supplemental restraint system