Renault ALASKAN 2020, Руководство пользователя транспортного средства

Страница: 69 / 334

•
When towing a trailer or driving uphill, reduce
the vehicle speed as soon as safely possible to
decrease the engine coolant temperature.
•
If the engine overheats, continued operation
of the vehicle may seriously damage the en-
gine. See “If your vehicle overheats” in the “6. In
case of emergency” section for immediate re-
quired action.
Low temperature indicator light (blue):
When the ignition switch is placed in the ON posi-
tion, the engine temperature warning light (blue)
comes on. After a few seconds, it should go out and
remain off while the engine is running.
Four-Wheel Drive (4WD)
warning light (4WD model)
When the ignition switch is in the ON position, the
Four-Wheel Drive (4WD) warning light illuminates.
After starting the engine, the 4WD warning light
turns off.
If the 4WD system malfunctions or the revolution or
radius of the front and the rear wheel differs, the
warning light will either remain illuminated or blink.
(See “Four-Wheel Drive (4WD) (where fitted)” in the
“5. Starting and driving” section.)
CAUTION
•
If the 4WD warning light illuminates or blinks
while driving, reduce the vehicle speed and
have your vehicle checked by an approved
dealer or qualified workshop as soon as pos-
sible.
•
If the Four-Wheel Drive (4WD) warning light
turns on when driving on dry hard surface
roads:
– in the 4H position, shift the 4WD mode
switch to 2WD.
– in the 4LO position, stop the vehicle and
shift the transmission lever to the N (Neu-
tral)
position with the brake pedal
depressed and shift the 4WD mode switch
to 2WD.
If the warning light is still on after the above opera-
tions, have your vehicle checked by an approved
dealer or qualified workshop as soon as possible.
Low fuel warning light
The low fuel warning light illuminates when the fuel
level in the tank is getting low. Refuel as soon as it is
convenient, preferably
before the fuel gauge
reaches the empty (0) position.
There will be a small reserve of fuel remaining in
the tank when the fuel gauge reaches the empty
(0) position.
Low washer fluid warning light
(where fitted)
The low washer fluid warning light illuminates when
the washer fluid in the reservoir is at a low level. Add
washer fluid as necessary. (See “Window washer
fluid” in the “8. Maintenance and do-it-yourself” sec-
tion.)
Malfunction warning light (red)
(where fitted)
When the ignition switch is placed in the ON posi-
tion, the malfunction warning light illuminates in
red. This means that the system is operational. Af-
ter starting the engine, the warning light turns off.
For the orange Malfunction Indicator Light (MIL), see
“Malfunction Indicator Light (MIL)” later in this sec-
tion for details.
If the malfunction warning light (red) illuminates
continuously while the engine is running, it may in-
dicate an engine control system malfunction. Have
your vehicle inspected by an approved dealer or
qualified workshop. You do not need to have your
vehicle towed to the dealer.
CAUTION
Continuing vehicle operation without proper ser-
vicing of the engine control system could lead to
poor driveability, reduced fuel economy, and
damage to the engine control system, which may
affect the vehicle’s warranty coverage.
Master warning light
(where fitted)
When the ignition switch is in the ON position, the
master warning light illuminates if any of the fol-
lowing are displayed on the vehicle information dis-
play.
•
No Key Detected warning (where fitted)
•
Shift to Park warning (Automatic Transmission
(AT) models)
•
Key ID Incorrect warning (where fitted)
Instruments and controls
61