Heater operation
Heating:
This mode is used to direct heated air from the foot
outlets.
1. Push the air recirculation
button for normal
heating. (The indicator light will turn off.)
2. Push the
button. (The indicator light will
turn on.)
3. Turn the fan speed control
dial to the de-
sired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Defrosting or defogging:
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Turn the fan speed control
dial to the de-
sired position.
2. Push the front defogger
button. (The indi-
cator lights on the front defogger
button
and the
A/C
button will turn on.) Then the air
recirculation indicator light will turn off.
3. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
To remove frost from the windscreen quickly, turn
the temperature control dial to the maximum hot
(right) position and the fan speed control
dial to the maximum position. For the best bi-
level heating performance, do not select the air
recirculation mode. For the best defogging per-
formance, do not select the air recirculation
mode.
Bi-level heating:
This mode directs cool air from the side/centre
vents and warm air from the foot outlets. (When the
temperature control dial is turned to the maximum
hot (right) or cool (left) position, the temperatures
from the side/centre vents and the foot outlets will
be the same.)
1. Push the air recirculation
button. (The indi-
cator light will turn off.)
2. Push the
button. (The indicator light will
turn on.)
3. Turn the fan speed control
dial to the de-
sired position.
4. Turn the temperature control dial to the desired
position.
Heating and defogging:
This mode heats the interior and defogs the win-
dows.
1. Push the air recirculation
button. (The indi-
cator light will turn off.)
2. Push the
button. (The indicator light will
turn on.)
3. Turn the fan speed control
dial to the de-
sired position.
4. Turn the temperature control dial to the maxi-
mum hot (right) position.
Air conditioner operation
The air conditioner system should be operated for
approximately 10 minutes at least once a month.
This helps prevent damage to the air conditioner
system due to the lack of lubrication.
Cooling:
This mode is used to cool and dehumidify the air.
1. Push the air recirculation
button. (The indi-
cator light will turn off.)
2. Push the
button. (The indicator light will
turn on.)
3. Turn the fan speed control
dial to the de-
sired position.
4. Push the
A/C
button. (The indicator light will turn
on.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
A visible mist may be seen coming from the vents in
hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
•
For quick cooling when the outside temperature
is high, push the air recirculation
button.
(The indicator light will turn on.) Be sure to re-
turn the air recirculation
button to turn off
for normal cooling.
142
Display screen, heater and air conditioner, and audio system
Содержание ALASKAN 2020
