REMS Picus DP Скачать руководство пользователя страница 24

Страница: 24 / 304

NOTICE

The casing pipes of the diamond core drilling crown are not hardened. Hitting

(with tools) and impact (during transport) on the casing pipe will lead to damage

that is likely cause the diamond core drilling crown and/or drilling core to become

seized. The diamond core drilling crown may then be rendered unusable.

2.3.3 Sharpening the diamond core drilling crown

REMS Universal diamond core drilling crowns have roof-shaped diamond

segments and do not have to be sharpened in the as-delivered state. At the

right thrust pressure and possibly by adding water, the diamond segments

sharpen themselves. Unsuitable thrust pressure as well as dry drilling in concrete

leads to the diamond segments being “polished” and no longer being able to

cut. If this occurs, use the diamond core drilling crown to drill 10 mm to 15 mm

into sandstone, asphalt or a sharpening stone ((55) accessory art. no. 079012)

in order to sharpen the diamond-tipped segments once more.

REMS dry diamond core drilling crowns LS

are delivered sharpened. The

diamond-tipped segments sharpen themselves with the micro-pulse technology

on the the core drilling machine switched on, with the use of a safety vacuum

cleaner/dust extractor of dust class M, e.g. REMS Pull M (Art. No. 185501) and

with the correct thrust pressure. If the diamond-tipped segments are polished

due to unsuitable thrust pressure, for example, and therefore no longer cut

properly, they can be sharpened. In this case, the diamond core drilling crown

is drilled 10 to 15 mm deep into sandstone, asphalt or a sharpening stone ((55)

accessory Art. No. 079012) to resharpen the diamond-tipped segments.

2.4 Manually-controlled dry boring REMS Picus S1, REMS Picus S3 and REMS

Picus SR (ﬁ g. 4), REMS Picus DP (ﬁ g. 10)

Secure the holder-up (12) to the drill collar (13) of the drive unit.

WARNING

Only use the tool held by hand with the counterholder (12) ﬁ tted (danger

counterholder

of injury)! Never perform hand-held dry drilling with REMS Picus SR in

stage 1. The resulting high torque can lead to injury.

Inhalation of the dusts produced by dry drilling is harmful to the health. Observe

the national regulations. It is recommended to use a safety vacuum cleaner/

dust extractor of dust class M, e.g. REMS Pull M (Art. No. 185501) with the

appropriate ﬁ lter; observe the operating instructions of the safety vacuum

cleaner/dust extractor. Use the suction rotor ((46) accessory Art. No. 180160)

with REMS Picus S1, REMS Picus S3 and REMS Picus SR. Connect the safety

vacuum cleaner/dust extractor to the suction hose connection (68) on REMS

Picus DP.

CAUTION

The mounted water supply system (15) gets in the way of hand-held dry drilling

with REMS Picus S1, REMS Picus S3 and REMS Picus SR and should there-

fore be disconnected. Remember to shut off the water inlet with its sealing cap

(14) to prevent dust from getting into the machine.

NOTICE

Always wet drilling with REMS universal diamond core drilling crowns

and REMS universal diamond core drilling crowns LS for steel-reinforced

concrete!

Always dry drilling with REMS dry diamond core drilling crowns LS with

core drilling machines with micro-pulse technology. Suck off the resulting

drilling dust with a suitable safety vacuum cleaner/dust extractor! Observe

the national regulations.

2.4.1 Only use tapping tool G ½ UDKB for REMS Picus S1, Picus S3 and Picus

SR and tapping tool G ½ TDKB for Picus DP

Manually-controlled tapping is made considerably easier, thanks to the REMS

tapping tool (49). This is ﬁ tted with a conventional hardened- metal Ø 8 mm

masonry bit, which is secured in place with an SW 3 hexa gon socket head

wrench. The G ½ thread is used to screw the tapping tool into the spindle of

the drive unit, where it is gently tightened with an SW 19 wrench.

Due to different lengths of the REMS UDKB and UDKB LS to the REMS TDKB

LS, the G ½ UDKB tapping tool cannot be used for the REMS TDKB and the

G ½ TDKB tapping tool not for the REMS UDKB and UDKB LS!

2.4.2 Dust extraction REMS Picus S1, REMS Picus S3 and REMS Picus SR

(ﬁ g. 4), REMS Picus DP (ﬁ g. 10)

WARNING

Inhalation of the dusts produced by dry drilling is harmful to the health. Observe

the national regulations. It is recommended to use a dust extractor to remove

drilling dust from the core bore. For REMS Picus S1, REMS Picus S3 and

REMS Picus SR, this consists of the REMS suction rotor ((46) accessory Art.

No. 180160) for dust extraction and a safety vacuum cleaner/dust extractor of

dust class M suitable for commercial use, e.g. REMS Pull M (Art. No. 185501)..

Observe the operating instructions of the safety vacuum cleaner/dust extractor.

The suction rotor (46) is screwed to the drive spindle (11) of the drive unit using

the G ½ connector. The combined annular core bit connector (47) on the

opposite side permits the ﬁ tting of diamond core drilling crowns with female

thread UNC 1¼ and the attachment of the tapping tool (49).

REMS Picus DP has an integrated suction rotor for dust extraction. The suitable

safety vacuum cleaner/dust extractor of dust class M, e.g. REMS Pull M (Art.

No. 185501) is connected directly to REMS Picus DP at the suction hose

connection (68).

NOTICE

Always wet drilling with REMS universal diamond core drilling crowns

and REMS universal diamond core drilling crowns LS for steel-reinforced

concrete!

Always dry drilling with REMS dry diamond core drilling crowns LS with

core drilling machines with micro-pulse technology. Suck off the resulting

drilling dust with a suitable safety vacuum cleaner/dust extractor! Observe

the national regulations.

If the dust produced by dry boring is not removed, the diamond core drilling

crown may overheat and suffer damage. There is also a risk of injury when the

drilling dust compressed in the gap blocks the diamond core drilling crown.

2.5 Wet boring REMS Picus S1, Picus S3, Picus S2/3.5 and Picus SR

Optimum drilling performance will only be achieved if the diamond core drilling

crown is provided with a constant supply of water. This keeps the diamond core

drilling crown cool and allows drilled-out material to be swilled from the bore

hole. To connect the water supply system (15), remove the cover (14) and

attach the water supply system with the ﬁ llister head screw supplied. The

quick-action coupling with water shutoff device should be ﬁ tted with a ½” water

hose. Water pressure should not exceed 4 bar.

If there is no direct water connection available, water throughﬂ ow can be

achieved using the water pressure tank ((51) accessory art. no. 182006). Be

aware that there is sufﬁ cient water ﬂ ow.

When drilling with REMS Titan or REMS Simplex 2 the water extractor ((44)

accessory art. no. 183606) can be used. See Fig. 11 and 12 for assembly. This

consists of a water collecting ring, a pressure ring and a rubber washer (45).

The water extractor is ﬁ xed to the base of the drilling column (1). The water

collecting ring is connected to a wet vacuum cleaner suitable for commercial

use, e.g. REMS Pull L or REMS Pull M. The rubber washer (45) must be cut

out exactly to ﬁ t the diameter of the diamond core drilling crown.

WARNING

REMS Picus DP is delivered without a PRCD fault current circuit breaker and

is suitable for dry drilling only. Wet drilling with, as well as connection of a water

hose to the REMS Picus DP is not permitted. There is a danger of electric

shock.

2.6 Boring with a drill upright

Good results can be obtained by operating with a drill upright. The purpose of

the drill upright is to guide the drive unit. Its power transfer rack-and-pinion

drive system ensures both hole-tapping with „feel“ and powerful infeed of the

diamond core drilling crown. REMS Picus S1, REMS Picus S3, REMS Picus

SR and REMS Picus DP can be mounted optionally on the REMS Simplex 2

or REMS Titan drill stand. REMS Picus S2/3,5 must be mounted on REMS

Titan.

In REMS Titan the clamping angle (10) or the REMS Picus S2/3.5 must be

mounted. The clamping angle (10) or the REMS Picus S2/3.5 must be inserted

in the guide (53) and fastened with the screws (52) for this.

The boring trestle (1) of REMS Titan is inﬁ nitely adjustable up to 45°. This allows

angled core drilling operations to be carried out within this angle range. The

degree marks on the struts (40) serve for orientation. To adjust the angle, the

two screws (31) at the foot of the boring trestle (1) are removed. The hexagon

head screw (37) and all the screws on the two struts must be loosened. The

boring trestle can now be swivelled to the desired position. Retighten all screws

before proceeding. The screws (31) are not installed to produce the angled

core drilling operation(s). The swivel adjustment of the boring trestle causes

the useful stroke range of the feed device of the REMS Titan to decrease more

or less. This means that you may have to use corresponding annular bit exten-

sions ((50) accessory art. no. 180155) (see 3.7).

The feed slide (2) can be locked on the drill stands. Tighten the wing nut (32)

for this. Locking prevents such undesired movements as the accidental lowering

of the drive unit while the diamond core drilling crown is being replaced.

On all drill stands the feed lever (4) can be ﬁ tted to the right or left of the feed

slider (2) according to local conditions (not preassembled in the as-delivered

state of REMS Simplex 2). Lock the feed slider as described above for this.

Unscrew the ﬁ llister head screw (34). Pull the feed lever off the feed shaft and

push it onto the shaft stump opposite. Screw in and tighten the ﬁ llister head

screw (34).

To achieve better stability when drilling with REMS Titan and REMS Picus SR,

the spacer set (38) can be mounted. For this, the clamping angle (10) may

have to be disassembled from the REMS Titan by loosening the screws (52).

Then clamping angle (10) is pushed onto the drill collar (13) of the REMS Picus

SR so that the tapped holes (60) of the gearbox casing of Picus SR are posi-

tioned in relation to the screw holes of the clamping angle (10). Insert the spacer

(without ﬁ llister head screws) and align. Screw in the ﬁ llister head screws

included in the set and tighten. Tighten the ﬁ llister head screws (8) of the

clamping angle (10). Fix the mounted clamping bracket together with Picus SR

to the REMS Titan as described in 3.4.

NOTICE

Remove dirt from between rack and slide immediately otherwise the slide can

block. The rack and slide could also be damaged.

2.7 Laser drilling centre pointer

To position the REMS drill stand, the laser drilling centre pointer ((58) accessory

eng eng

Содержание Picus DP

















































































































































































































































































































Результаты поиска

Содержание Picus DP

Отзывы:

Похожие инструкции для Picus DP

Бренды по названию

Популярные бренды

REMS Picus DP, Инструкция по эксплуатации

Результаты поиска

Содержание Picus DP

Отзывы:

Похожие инструкции для Picus DP

Бренды по названию

Популярные бренды