REMEHA Gas 220 Ace 160, Инструкция по установке, эксплуатации и обслуживанию

Страница: 30 / 92

6.5 Air supply/flue gas outlet connections
6.5.1 Classification
Important
The installer is responsible ensuring that the right type of flue
gas outlet system is used and that the diameter and length are
correct.
Always use connection materials, roof terminal and/or outside
wall terminal supplied by the same manufacturer. Consult the
manufacturer for compatibility details.
Tab.12 Type of flue gas connection: B
23P
Principle Description Permitted manufacturers
(1)
AD-3001055-01
Room-ventilated version
Without down-draught diverter.
Flue gas discharge via the roof.
Air from the installation area.
The IP rating of the boiler is lowered to IP20.
Connection material and roof
terminal:
Muelink & Grol
(1) The material must also satisfy the material property requirements from the relevant chapter.
Tab.13 Type of flue gas connection: C
13
Principle Description
Permitted manufacturers
(1)
AD-3001056-01
Room-sealed version
Discharge in the outside wall.
Air supply opening is in the same pressure zone as the dis­
charge (e.g. a combined outside wall terminal).
Parallel not permitted.
Outside wall terminal and con­
nection material:
Remeha, combined with con­
nection material from Muelink
& Grol
Muelink & Grol
(1) The material must also satisfy the material property requirements from the relevant chapter.
Tab.14 Type of flue gas connection: C
33
Principle Description
Permitted manufacturers
(1)
AD-3001057-01
Room-sealed version
Flue gas discharge via the roof.
Air supply opening is in the same pressure zone as the dis­
charge (e.g. a concentric roof terminal).
Roof terminal and connection
material
Remeha, combined with con­
nection material from Muelink
& Grol
Muelink & Grol
(1) The material must also satisfy the material property requirements from the relevant chapter.
6 Installation
30 7665063 - v.05 - 18102018