manualshive.com logo in svg

REMEHA Gas 220 Ace 160, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
REMEHA Gas 220 Ace 160 Скачать руководство пользователя страница 44

1. Fill the siphon with water up to the mark.
2. Push the siphon firmly into the designated opening

 behind the 

cover underneath the boiler and connect the siphon hose.

3. Push the retainer clip of the siphon forwards.

4. Check whether the siphon is firmly fitted in the boiler.

Danger

The siphon must always be sufficiently filled with water. This 

prevents flue gases from entering the room.

6.7.3 

Filling the system

Important

In order to be able to read off the water pressure from the control 

panel, the boiler must be switched on. If the water pressure is too 

low, the boiler or the boiler pump will not start.

1. Fill the central heating system with clean tap water. 

Important

The recommended water pressure is between 1.5 and 2 bar.

2. Check the water-side connections for tightness.

Fig.49

Fill the siphon

AD-4100153-01

4

1

2

3

6  Installation

44

7665063 - v.05 - 18102018

Содержание Gas 220 Ace 160





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды